Add or Edit a Configuration Profile

ExtremeCloud IQ Controller is installed with a default configuration Profile for each AP platform. You can modify the default Profile or create a new Profile, but default Profiles cannot be deleted.

New Profiles display the configuration settings that were delivered with your initial ExtremeCloud IQ Controller installation. After making changes, if you need to return to a base ExtremeCloud IQ Controller configuration, create a new Profile for the AP platform. The new Profile will consist of the initial settings. Before configuring a unique configuration Profile, configure the networks and roles associated with the new Profile.
  1. Go to Configure > Sites and select a site.
  2. Select the Device Groups tab.
  3. To add a new device group, select Add. Or, select a device group from the list.
  4. From the Profile field:
    • To add a new profile, select . Then, provide a name and platform.
    • To edit a profile, select .
    • To copy or clone a profile, select . Then, provide a name.
  5. Configure the following parameters:
    Table 1. Profile Configuration Parameters
    Field Description
    Name Name of the configuration Profile.
    AP Platform Select the AP Platform on which to base the new configuration Profile. Then, select Save.

    The Profile settings display.
    Advanced Select Advanced to view or modify Advanced Configuration Profile Settings.
    Networks Lists configured networks. Select a radio band and port (if applicable) for a configured network.

    Enable Band Steering per SSID for Wi-Fi 6 APs.
    Mesh Points Define mesh points for a wireless mesh network. ExtremeCloud IQ Controller allows one mesh point per AP, configured on one or more radios. For more information, see Advanced Configuration and Mesh Device Settings.

    Transparent Bridge is supported in a mesh network. A Transparent Bridge provides a mesh link between two sites without requiring policy enforcement per device. For more information, see Transparent Bridge.

    Note: Mesh and Client Bridge cannot be configured on the same radio.
    Roles List of configured policy roles. Select a policy role. You can also add a new policy role, edit a policy role, or delete a policy role. For more information, see:
    Radios Configure radio mode and advanced radio settings:
    • Admin Mode - Determines the radio mode. Select On to enable the radio. Select Off to disable the radio.
    • Mode - Radio mode. Values depend on the AP model and radio band: For more information, see Understand Radio Mode.
    • Client Bridge Network - Network associated with the Client Bridge. This field displays when Radio Mode is Client Bridge. For more information, see Configure Client Bridge.
      Note: Client Bridge and Mesh cannot be configured on the same AP.

    For AP5020, the radio values displayed depend on which setting is indicated in the Operating Mode.

    For each radio band, select Advanced to configure Advanced AP Radio Settings.
    Wired Ports If the AP supports wired ports, configure port speed for each port. Valid values are:
    • Auto
    • 100M
    • 10M
    VLANS Topologies associated with the configuration Profile. Associate a topology to a specific device group. This enables you to define a topology that is common to a set of devices and specify a specific attached VLAN.

    Topologies referenced by attached networks or roles are automatically added to the Profile VLANS list. You can also add topologies manually to the list. When creating a new topology, select the Profiles to associate with the new topology. For more information, see Configuring VLANS.
    AirDefense Select a configured air defense Profile. Or,
    • Select to add a new Profile.
    • Select to edit the selected Profile.
    ESL For AP Profiles that have the feature code ESL (Electronic Shelf Label), select a configured ESL Profile. Or,
    • Select to add a new Profile.
    • Select to edit the selected Profile.
    IoT Select a configured IoT Profile. Or,
    • Select to add a new Profile.
    • Select to edit the selected Profile.
    Note: Supported on AP391x, Wi-Fi 6 AP models.

    Not supported on AP3935 and AP3965, and not supported on the APxx-1 models.
    Positioning Select a configured Positioning Profile. Or,
    • Select to add a new Profile.
    • Select to edit the selected Profile.
    Note: Supported on Wi-Fi 6 AP models.
    Analytics Select a configured ExtremeAnalytics Profile. Or,
    • Select to add a new Profile.
    • Select to edit the selected Profile.
    Note: Supported on Wi-Fi 6 AP models.
    RTLS Select a configured RTLS Profile. Or,
    • Select to add a new Profile.
    • Select to edit the selected Profile.
9038996-00 Rev. AB